You Are Here: Online Shop > Electrosurgery > Bovie Aaron Electrosurgery > Bovie Aaron Desciccators, Generators & Smoke Evacuators > Aaron Smoke Shark II 220V + SF35 + F/switch (SE02-220)

Bovie Aaron Desciccators, Generators & Smoke Evacuators

Aaron Smoke Shark II 220V + SF35 + F/switch (SE02-220)

Product Code: SE02-220

£2549.20 ex. VAT
£3059.04 inc. VAT


Aaron Smoke Shark II 220V + SF35 + F/switch (SE02-220)

Bovie® Smoke Shark II Smoke Evacuation Systems are intended to evacuate and filter surgical smoke plume and aerosols created by the interface surgical tools with tissue, examples being la-sers, electrosurgery systems, and ultrasonic devices.

The Smoke Shark II Smoke Evacuation Systems have been designed with a high suction, high flow rate vacuum motor. The ultra-quiet motor is used to draw the surgical smoke from the surgi-cal site through the vacuum tubing and into the Bovie® SF35 Filter where the surgical smoke is processed by a series of filters. A single disposable filter is used to simplify the installation and removal during filter changes. The filter is completely enclosed to protect the healthcare person-nel from potential contamination during filter changes. One Bovie® SF35 Filter contains four different stages within to capture the smoke plume.

  • The first stage filtration is a prefilter whose function is to trap and remove gross particulate and casual fluid. The second stage filtration is ULPA grade (Ultra Low Penetration Air) filter whose high-tech patented (U.S. Patent #5874052) design captures particulates and micro-organisms from .1 to .2 microns at an efficiency of 99.999%.
  • The third stage filtration uses the highest grade virgin activated carbon, especially designed for Bovie Medical Corporation for the removal and adsorption of odors and toxic gases produced by burning tissues. These harmful gases may constitute a health hazard to healthcare profession-als who are subjected to prolonged exposure. The activated carbon used in the Smoke Shark II Smoke Evacuation Systems preferentially removes toxic organic gases rather than water vapor and provides optimal odor removal.
  • The fourth stage filtration is an expanded foam used to trap activated carbon fines from migrating out of the filter.
  • The electronic controls on the face panel of the Smoke Shark II Smoke Evacuation System has been designed “user friendly” and facilitate unit set up and operation.

Features and Benefits

  • A modern, light-weight, compact design allowing for simplified use, storage and stack-ability
  • Never again order the Smoke Shark and still need to order a filter upon receipt, the SE02 is packaged with both the SF35 Extended-Life Filter and FSSEP Pneumatic Footswitch
  • The SF35 Extended-Life Filter offers up to 35 hours of performance reducing procedure cost by 38%(+/-) from the previous model, when used at the lowest setting.
  • Covered 3-port filter design accommodates a variety of tubing sizes [1/4"(6.4mm), 3/8"(9.5mm), and 7/8"(22mm)] providing versatility in procedure and accessory setup
  • The ultra-quiet design offers the same excellent performance with less noise
  • The SE02 Smoke Shark Smoke Evacuator is -3 and RoHS compliant
  • Easy To Operate
  • Quiet And Effective Smoke Evacuation
  • Long-life 35-hour Filter
  • Low Cost Per Procedure
  • Excellent Particle Capture


  • Line voltage: SE02: 100/120 VAC
  • Line voltage: SE02-220: 220/240 VAC
  • Frequency: 50-60 Hz
  • Width: 27.9 cm (11")
  • Height: 15.2 cm (6")
  • Depth: 39.4 cm (15.5")
  • Weight: 4.3 kg (10 lbs.)
  • Warranty: (Unit) - 2 year


  • Unit    
  • Power Cord    
  • User's Guide    
  • Pneumatic Footswitch (FSSEP)    
  • Long Life 35-hour Filter (SF35)