You Are Here: Online Shop > Blood Pressure Monitors > Aneroid Sphygmomanometers > SunTech Medical > SunTech 247 BP Device With SpO2, Rechargeable Battery, Mobile Stand & Basket (W9448)

SunTech Medical

SunTech 247 BP Device With SpO2, Rechargeable Battery, Mobile Stand & Basket (W9448)

Product Code: W9448

£1699.00 ex. VAT
£2038.80 inc. VAT

Quantity:

SunTech 247 BP Device With SpO2, Rechargeable Battery, Mobile Stand & Basket (W9448)

The SunTech 247 Diagnostic Station provides both an affordable replacement for mechanical gauges and mecury sphygmomanometers and the potantial of a vital signs device without the expense. Additionally, the SunTech 247 comes in a variety of mounting options so you can use it wherever, whenever and however you like.

Purchase the SunTech 247 to your preferred configuration or upgrade at any time. With connect-and-go capability, adding optional temperature and pulse oximetry modules is effortless. No tools required! Upgrade with confidence. The SunTech 247 puts all of your vital signs needs into one optimised diagnostic station when ever you need it.

Start With Blood Pressure

Designed with the idea that no two patients are the alike, the SunTech 247 Diagnostic Station is the first clinical grade, automated blood pressure device to offer the manual back-up mode. WIth 10 all-purpose cuff sizes, ranging from child to thigh, the SunTech 247 caters to all of your patients.

The SunTech 247 is intended for patients ages 3 and up.

Included

  • Adult and Large Adult All Purpose Cuffs
  • 8" blood pressure hose
  • Mains/Power Supply
  • Mains/Power Cable
  • Has BHS Validation, ESH International Protocal and AAMI SP10
  • SpO2
  • Rechargeable Battery
  • Mobile Stand & basket
  • Warranty 2 years

(Optional) Automated Temperature Readings. WIth connect-and-go capability, adding temperature is effortless.

The temperature module allows both oral/axillary and rectal readings with corresponding colour-coded probe wells for storage. Simply remove the plastic end-cap on the top of your SunTech 247 BP module and slide the temperature module until it snaps into place. The temperature module is ready to use instantly.  An Oral/Axillary probe (blue) and 1 box of FILAC FAST TEMP Probe Covers are included.

SpO2 Readings in an Instant

The SunTech 247 SpO2 module comes with a finger clip sensor that can be used for multiple readings. SImply remove the plastic end-cap on the bottom of your SunTech 247 BP module and slide the SPO2 module until it snaps into place. Reusable Adult Finger Sensor and a 6" Extension Cable are also included.

Specifications

  • Patient population:    Adult and pediatric patients (age 3 and above).
  • Method of measurement:    Oscillometric
  • Initial inflation pressure:    160mmHg +/- 20mmHg
  • Blood pressure range (mmHg):    60 < Systolic BP < 270, 30 < Diastolic BP < 170
  • Blood pressure accuracy:    Measurements determined with this device are equivalent to those obtained by a trained observer using the cuff/stethoscope auscultation method, within the limits prescribed by the American National Standard, Electronic or automated sphygmomanometers.
  • Blood pressure determination time:    35-40 seconds typical for Adult cuff
  • Heart rate range:    30-200 bpm +/- 2% or +/- 3 bpm, whichever is greater
  • Temperature range:    86°F (30.0°C) – 109.4°F (43.0°C)
  • Temperature accuracy:    +/- 0.2°F (+/-0.1°C)
  • Functional oxygen saturation range:    40-100%
  • Functional oxygen saturation accuracy:    70-100% +/- 2 digits (Note: because pulse oximeter equipment measurements are statistically distributed, only about two-thirds of pulse oximeter equipment measurements can be expected to fall within ± 2 digits of the value measured by a CO-oximeter.)
  • Operating conditions:    10°C (50°F) to 40°C (104°F) Less than 90% RH
  • Storage conditions:    -20°C (-4°F) to 55°C (131°F) Less than 90% RH
  • Power:    External power supply, p/n 19-0013-00 or equivalent approved by SunTech. Input: 100-240V AC @ 47-63 Hz. Output: 6V DC @ 15W. External power supply, p/n 19-0016-00 or equivalent approved by SunTech. Input: 100-240V AC @ 50-60 Hz. Output: 9V DC@ 18W.
  • Calibration:    Check once per 2 years for BP and Temperature
  • Safety systems:    Independent hardware over-pressure circuit and redundant software overpressure algorithm to limit cuff pressure to less than 330 mmHg. Independent hardware timing circuit and redundant software timer algorithm to limit the duration of a blood pressure cycle to less than 180 seconds.
  • Dimensions:    Length = 5.5 inches, Height = 11.5 inches, Width = 3.8 inches; Length =14.0 cm, Height = 29.2 cm, Width = 9.7 cm
  • Standards:    UL60601-1, CAN/CSA C22.2 601-1 IEC 60601-1, IEC 60601-1-2 (EMC), IEC 60601-1-4, ISO 9919, AAMI SP10:2002, ASTM E 1112, EN 12470-3 Meets “Non-invasive Sphygmomanometers — General Requirements & Supplementary Requirements for Electro-Mechanical BP Measuring Systems”, EN 1060-1, EN 1060-3
  • Classification:    Protection against electric shock: Class II (for non-battery version), Internally Powered Equipment (for battery version); Applied parts: Type BF; Mode of operation: Continuous

Get a Quote