DeVilbiss SleepCube Auto BiLevel UK Model (DV57UK)

Brand:Mistry Medical
Product Code: DV57UK

£1,605.50

exc VAT

Total Cost: £1,605.50 exc VAT

Qty:

Description
About DeVilbiss SleepCube Auto BiLevel UK Model (DV57UK)

DeVilbiss SleepCube Auto BiLevel UK Model (DV57UK)

The SleepCube AutoBilevel adds an extra level of comfort for Bilevel users.

Traditional BiLevel therapy uses a higher fixed level of inspiratory pressure (IPAP) and a lower expiratory pressure (EPAP) to prevent apnoeas, hypopnoeas or snoring. Using our ‘proven’ auto-adjusting algorithm the AutoBilevel constantly monitors for apnoeas and events. Upon their detection the Bilevel pressure automatically adjusts to deliver the best possible treatment during sleep.

This is especially useful and comfortable for those users who require high pressures.

Features
- IPAP automatically adjusts in response to events while the pressure support setting ensures the EPAP stays below the IPAP by a constant amount
- Pressure range of between 3 and 25 cmH2O in both BiLevel and CPAP mode
- Smallest footprint of all leading CPAP devices with heated humidification system attached
- SmartCode remote data compliance feature included, which encodes usage data into a series of letters and numbers that can be easily decrypted using free software or online at http://www.sleepcube.com
- Among the quietest CPAPs on the market - only 26 dBA
- Can be operated from a 12V DC source such as that found in a motor home (not with heated humidifier) and will switch automatically to AC power if connected and available
- Auto-switching universal power supply of 100 – 240 V and 50 – 60 Hz, and automatic altitude compensation between 0 and 2600m (9000ft)
- Large backlit LCD and easy to follow patient menu
- Auto on/off automatically starts the flow of air on breathing into the mask and stops the flow of air when mask is removed
- Delay pressure ramp eases the device to the prescribed pressure. Ramp delay settings of 0 to 45 minutes in 5-minute increments
- Visual mask off alert feature
- Supplied with 6ft tubing as standard. Optional 10ft patient tubing available
- Large slip-resistant pads on bottom of unit minimise movement on the bedside table during the night
- Patient air tubing extends from the back of unit to enhance visual appeal
- Integrated heated humidification system easily docks onto the bottom of the unit without requiring a separate hose or power cord
- SmartLink module and software available for more detailed patient therapy management. Data is transferred to the PC via SD card for further analysis and reporting using the SmartLink software package.
- Flow rounding comfort feature included
- Integrated event detection feature
- Real-time display - LCD display shows actual pressure, leak rate and patient breathing parameters such as breath rate, I/E ratio, minute volume and tidal volume
Specifications
- Dimensions (H x W x L) 10.8 x 16.5 x 17.8 cm
- Weight 1.18 kg
- BiLevel Pressure Range 3 - 25 cm H2O
- Operating 5° C to 40° C, 0 % to 95 % R.H. non-condensing
- Operating Atmospheric Conditions Sea level to 2,600 m
- Sound Level 26 dBA
- Maximum Power Consumption 65 W from AC power source (PAP device only)
- Electrical Requirements 100 - 240 VAC, 50/60 Hz, 12 VDC